Factory Unlock Iphone USA AT&T ,Tmobile
|
Service Imformation For Iphone Clear or bad
|
Unlock code For Samsung android 1 -7 days ,
|
READ TERMS AND CONDTIONS BEFORE PLACING ORDER
DO NOT ORDER UNLESS YOU AGREE TO TERMS AND CONDITIONS!!!
Terms and Conditions: Once the order is placed for this service it is NON-REFUNDABLE. There are NO cancellations and absolutely NO REFUNDS for any reason. The estimated completion time is usual and customary but NOT guaranteed. There will be no refund if it takes longer than the estimated completion time. We will not accept any liability for failure of this service. If this service fails it is most likely because the phone is blacklisted or blocked because of non-payment on contract. If a phone has been blacklisted because it was reported lost or stolen, if it has been blocked by AT&T because of non-payment on contract, or if it has been replaced there will be no refund. We are not responsible to find out whether a phone is blocked or blacklisted. If you want to make sure it is not blocked or blacklisted contact AT&T. By placing an order you agree to these terms and conditions.
Intructions
by UnlockUSA
How To Unlock iPhone:
1. Send the IMEI to our server Unlockyes
2. Wait till we return the answer “activated”
3. Then, install last version of iTunes
4. Make sure phone is last version updated by official itunes sw
5. Connect phone to iTunes with not accepted (not valid) simcard
6. Wait until itunes detect phone
7. Now disconnect phone and reconnect after 10 seconds.
8. Phone Unlocked
NOTE: This is the only “lifetime” unlock solution for Apple iPhone as the IMEI is registered as “Unlocked” in Apple database. Your phone will always be unlocked even after each new update of your phone firmware !FaqsWhy my Apple iPhone is locked?When you purchase a cell phone it is often offered at a discounted price by the cellular network. In return for this generosity they “lock” your Apple iPhone to their network, so that you can only use their network for making and receiving calls. This means that you cannot use the SIM card of another network, and if you try to do so the phone will display “Phone Restricted”, “Contact Service Provider”, “Enter Unlock Code” or a similar message. Unlocking the phone removes this lock, allowing you to use your Apple iPhone on any GSM wireless network anywhere in the world.Why should I unlock my Apple iPhone?
• Save a fortune abroad, by using cheap local SIM cards rather than expensive roaming tariffs.
• As usually subsidize the cost of the phone, by unlocking it you are increasing the resale value of your Apple iPhone by up to 300%.
• Use your work and personal SIM card in your unlocked Apple iPhone no need to carry two phones again.
HOW TO UNLOCK BLACK BERY
By.unlockusa
WARNING: If after you enter “meood” or “mepd” from the unlock instructions below and your “Enter Network MEP” box show less than 4 try left (default is 10 try left). STOP, do not enter the unlock code. You MUST visit and click “How to Read Blackberry MEP Name” to get the MEP Name and contact us. If you enter the wrong code and get to 0 try left, your Blackberry will be permanent locked. Therefore, with MEP Name, you are 100% sure that the unlock code is correct.
Model: 6xxx 7xxx: Example; 6230, 7100, and 7290 etc.:
Before you start, you MUST take out the Sim Card & turn OFF ALL wireless radios
1. Press the Menu key.
2. Select Options / Settings.
3. Select Sim Card.
4. Enter MEPD (not case sensitive), Note: When typing in MEPD, the letters will not appear on the screen.
5. Then enter MEP Hold Alt Key and type number 2. NOTE: You must use the “alt” key to enable numbers, example: enter MEP hold “ALT key” and enter 2. Note: When typing in MEP2, the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box. If you do not see “Enter Network MEP” box, you didn’t type in MEP2 properly.
Model: 7100, 8100, 8110, 8120 & 8220, 9100:
Before you start, you MUST have a Sim Card & turn OFF ALL wireless radios
1. Press the Menu key.
2. Scroll to Turn Wireless Off and press the trackball (Will show Turn Wireless ON).
3. Scroll to Options and press the trackball.
4. Scroll to Advanced Options and press the trackball.
5. Scroll to SIM Card and press the trackball.
6. Type MEOOD (not case sensitive). This step opens up the personalization on the device.
7. Type MEOO, then hold ALT key and type number 2. Note: When typing in MEOO2 the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
8. Enter Unlock Code.
9. Press the Enter Key. (Make sure you press the Enter Key within 5 second or you have to enter the unlock code again).
Model: 8700, 8700c, 8700g, 8700r
Before you start, you MUST have a Sim Card & turn OFF ALL wireless radios
1. Press the Menu key.
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Setting icon.
5. Scroll to Options.
6. Scroll to and select Advanced Options.
7. Scroll to and select SIM Card.
8. Type MEPD Note: When typing in MEPD the letters will not appear on the screen. This step opens up the personalization on the device.
9. Type MEP then hold “Alt” key and type number 2. Note: When typing in MEP and hold “Alt” key and 2; the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
10. Enter the unlock code.
11 . Press the Joydial to confirm (“Code Accepted should display)
12. Press and hold the red End key to turn the handheld off and then back on.
13. Once the device has powered on, follow steps 1 & 2 and restore connections.
Model: Most Model
Before you start, you MUST have a Sim Card (could be Active or Inactive) & turn OFF ALL wireless radios. After turn on the phone, if phone ask for Network MEP code, select NO.
1. Press the Menu key.
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options or Device>Advance System Setting (depend on model).
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen. This step opens up the personalization on the device.
8. Type MEP then hold “Alt” key and type number 2. Note: When typing in MEP and “Alt” and number 2; the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box. IF “Enter Network MEP” box does not open, then hold the “Alt” key and type mep2.
9. Enter the unlock code.
10. Press the trackball (“Code Accepted should display)
11. Press and hold the red End key to turn the handset off and then back on.
12. Once the device has powered on, follow steps 1 & 2 and restore connections.
Method 1: Model: 9500, 9530 Storm, 9550 Storm 2
Before you start, you MUST have an Unauthorized Sim Card inserted. Unauthorized Sim Card is a Sim Card that is NOT belongs to the provider of the phone. Example: If you have a Verizon phone, you need to insert a T-Mobile Sim Card inside the phone before turn it on.
1. Power on the phone.
2. Phone will said “MEP check failed. Do you want to enter MEP unlock code”. Select Yes.
3. “Enter Network MEP code (# left)”. Enter the unlock code.
4. Press Enter, you should see “Code Accepted”
5. You need to check Network Connection is set on GSM/UMTS. Menu>Manage Connection>Mobile Network Options and make sure it GSM/UMTS.
6. Once GSM/UMTS is selected. You can now ready to make phone call.
Notice: If the network not working after your phone is fully charged and unlocking process “Code Accepted”. You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network. Now it should work. (Verizon 8830 World Edition DOES NOT work in USA )
Method 2: Model: 8830, 9500, 9530 Storm, 9550 Storm 2
Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.
1. Press the Menu key
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.
8. Type MEP then hold “Alt” key and type number 2. Note: When typing in MEP “Alt” and number 2; the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the unlock code.
10. Press Enter (Press the trackball for 8830), you should see “Code Accepted”
11. Press and hold power key to turn the handset off and then back on.
12. Once the device has powered on, follow steps 1 & 2 and restore connections.
Notice: If the network not working after your phone is fully charged and unlocking process “Code Accepted”. You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network. Now it should work. (Verizon 8830 World Edition DOES NOT work in USA )
Model: For Telus & Bell Mobility, Some Fido model and all carrier that have Service Provider block (MEP4).
Sometime we send you two sets of Unlock Code, use the code as a set;
Example: MEP2:43237528-AND-MEP4:35848078 OR MEP4:4371476728858074.
Set 1: MEP2:43237528-AND-MEP4:35848078.
Set 2: MEP4:4371476728858074.
DO NOT mix these two sets. Determine which option look similar to your phone and then follows the correct instructions.
1. If your Blackberry has only Network “Active”, then choose Option 1. You ONLY need the MEP2 code we send you.
2. If your Blackberry has both Network and Service Provider “Active”, then choose Option 2. You need both the MEP2 and MEP4 code we send you.
3. If your Blackberry has only Service Provider “Active”, then choose Option 3. You ONLY need the MEP4 code we send you.
Option 1: Option 2 Option 3 ID: 8901260700015407027 ID: 8901260700015407027 ID: 8901260700015407027 Personalization: Personalization: Personalization: SIM: Disabled SIM: Disabled SIM: Disabled Network: Active (MEP2) Network: Active (MEP2) Network: Active (MEP2) Network Subset: Disabled Network Subset: Disabled Network Subset: Disabled Service Provider: Disabled (MEP4) Service Provider: Active (MEP4) Service Provider: Active (MEP4) Corporate: Disabled Corporate: Disabled Corporate: Disabled Option 1: Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.
1. Press the Menu key.
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.
8. Type MEP then hold “Alt” key and type number 2. Note: When typing in MEP and “Alt” and number 2; the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the MEP2 code we send you.
10. Press Enter (Press the trackball for 8830), you should see “Code Accepted”
11. Press and hold power key to turn the handset off and then back on.
12. Once the device has powered on, follow steps 1 & 2 and restore connections.
Option 2: Before you start, you MUST have a Sim Card inside the phone (could be Active or Inactive) & turn OFF ALL wireless radios.
1. Press the Menu key.
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen.
8. Type MEP then hold “Alt” key and type number 2. Note: When typing in MEP Alt 2 the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the MEP2 code we send you.
10. Press the trackball (“Code Accepted” should display).
11. Type MEP then hold “Alt” key and type number 4.
12. Enter the MEP4 code we send you.
13. Press the trackball (“Code Accepted” should display again).
14. Press and hold the red End key to turn the handset off and then back on.
15. Once the device has powered on, follow steps 1 & 2 and restore connections.
Option 3: Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.
1. Press the Menu key.
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.
8. Type MEP then hold “Alt” key and type number 4. Note: When typing in MEP and “Alt” and number 4; the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the MEP4 code we send you.
10. Press Enter (Press the trackball for 8830), you should see “Code Accepted”
11. Press and hold power key to turn the handset off and then back on.
12. Once the device has powered on, follow steps 1 & 2 and restore connections.
Here are the SPC/MSL CDMA Unlock Codes
MSL/SPC Code: To use this code:
1. From the home screen of the Blackberry, press the green call button to enter the phone.
2. Type in ##MSL/SPC CODE then the green talk button (ie: ##123456 Green talk button).
3. In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number.
4. Press the menu key and choose save.
5. The device will re-boot.
When the device re-boots, Activation Required will be gone and the active carrier name will now appear.
Known issue for Verizon 8830 World Edition & 9530 Storm, 9550 Storm 2, Tour 9630:
1. If your Storm is not recognizing the network, make sure your phone battery is full and the radio is on.
2. Sometimes the phone requires you to do “MEPPD” and “MEPP2” instead of “MEPD” and “MEP2″. If this occurs, redo unlock step above with “MEPPD” and “MEPP2”
3. If the network not working after your phone is fully charged and unlocking process “Code Accepted”. You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network. Now it should work. (Verizon 8830 World Edition DOES NOT work in USA )
Removing “Activation Required” on the screen for Verizon Storm:
1. On the main screen, press ##000000
2. For the Mobile Directory Number, Enter your phone number in here.
Press the Menu to save the options and the phone will automatically restart.
HOW TO UNLOCK SAMSUNG OR ANDROID
IMPORTANT NOTICE: Make sure to turn off Wi-Fi under wireless connections to OFF for all Android Device before proceeding to entering the Unlock code. Our Samsung code process is 99.9% accurate if you provide the correct information. Therefore, a Video proof will be required if code error occur for verification. It is also good idea to film your unlocking process so I may help to troubleshoot the problem. If you get “Network Unlock Unsuccessful” message. This is a known issue so not to worry. At the end of this instruction, there is a troubleshoot guide to help you resolve this issue. Model: Most New Samsung Model 1. Insert Unauthorized Sim Card into device 2. Power on the device 3. Enter Unlock Code when prompted 4. Device should be unlock if “Code Accepted” If the phone show “Phone Freeze” message. This mean someone already tried to enter the wrong code into this phone too many time. You will require to order a defreeze code. If after you enter the Unauthorized Sim Card and phone is not prompt to enter the Unlock Code and your Samsung is android, Go to the dial screen and press #7465625*638*# Once prompted for code, enter 8 digit Unlock Code. Or If you see “No Valid Sim Card” after you insert an Unauthorized Sim Card, remove the Unauthorized Sim Card and use the Authorized Sim Card or with NO Sim Card and follow this instruction. 1. Type #7465625*638*CODE# (CODE is the Unlock Code I sent you) 2. Phone deactivated message means its unlocked Or 1. Switch ON the phone without a Sim Card (if this does not work try with a Unauthorized Sim Card first and if necessary try an Authorized Sim Card ) 2. Type: #0111*CODE# (CODE is the Unlock Code I sent you) Solution for “Network Unlock Unsuccessful” or “Code Error” First check the IMEI you provide by type *#06# on the phone. If you provide the correct IMEI, then continue. Troubleshoot Guide Solution #1 1. Turn the phone Wi-Fi OFF and then turn device ON without SIM card. 2. Type *7465625*638*# 3. You will see the NETWORK LOCK screen 4. In MCC/MNC field, enter MCC/MNC code for the provider you want to use. (example: enter 310260 if you want to use this phone for T-mobile USA Sim Card; 310410 or 310380 for AT&T). Check this link for complete MCCMNC for your provider: (It is very important to try all the MCC/MNC code if your New Sim Card Network has more than one code) 5. In CONTROL KEY field, enter the Unlock Code 6. Press OK 7. You should get a message: LOCK SUCCESSFUL 8. Turn off your phone, insert your New Network Sim Card and power ON. The phone should be unlocked. If this solutions does not work for your phone; Go to Solution #2 Troubleshoot Guide Solution #2 (You will require a Defreeze (Unfreeze Code), or MCK code for this solution) Follow these step carefully, as long as you have the correct code it will work 100% 1. Insert an Unauthorized Sim Card and power ON your phone. You will see “SIM Network Unlock PIN” or “Enter Network Lock Control Key” on the screen. 2. Type your Defreeze Code (MCK Code) and hit Unlock button. You will get a “Unsuccessful” message but don’t worry, this is normal. 3. Now type the Unlock code (Network or NCK Code) and hit Unlock button. If the phone say “Network Lock Successful” it worked and your phone unlocked. But if not, go on to step 4. 4. If you get “Unsuccessful”, hit Dismiss button and type *2767*3855# on phone keypad. (CAUTION! This will reformat all your data!, you will lost all data on the phone.) 5. After phone restarts, enter the Defreeze Code (MCK Code) when prompted at “SIM Network Unlock PIN” or “Enter Network Lock Control Key” screen and hit Unlock button. You will get a “Unsuccessful” message but don’t worry, this is normal. 6. Enter the Unlock Code (Network or NCK code) and hit Unlock button. 7. Your phone should now say “Network Lock Successful” 8. Now your phone is successfully unlocked! Model: SGH-A127, SGH-E840, SGH-F210, SGH-J600, SGH-T749 1. Turn ON your phone without Sim Card 2. Type #0111*CODE# (CODE is the Unlock Code I sent you) 3. Device should say “Network Lock Deactivated” 4. The phone may reboot and the unlock is completed Model: A107, A137, A167, A177, A227, A237, A437, A517, A707, A767 Propel, A837 Rugby, A798 Mythic, A867 Eternity, A887 Solstice, C417, E250, E370, E590, F400, F480, F490, G600, i907 Epix, J700, L760, S366, T309, T319, ST349, T409, T429, T439, T459 Gravity, T469, T509, T609, T639, T659, T669, T919 Behold, T929, U900, X497, Z105, Z107, Z560. 1. Turn ON your phone without Sim Card 2. Type #7465625*638*CODE# (CODE is the Unlock Code I sent you) 3. Device should say “Network Lock Deactivated” 4. The phone may reboot and the unlock is completed Or 1. Turn ON your phone Authorized Sim Card 2. Type #7465625*638*CODE# (CODE is the Unlock Code I sent you) 3. Device should say “Network Lock Deactivated” 4. The phone may reboot and the unlock is completed Model: SGH-A877 1. Insert an Authorized Sim Card and turn ON your phone 2. Device must be in Portrait mode. Hit the Dial button on the touch screen. 3. Type #7465625*638*CODE# (CODE is the Unlock Code I sent you) 4. Device should say: “Network Lock Deactivated” 5. Phone may automatically reboot Model: A737, A777, Blackjack SGH-i607, SGH-i616, SGH-i617, SGH-i627, SGH-i637, SGH-A877 1. Insert an Authorized Sim Card and turn ON your phone 2. Type #7465625*638*CODE# (CODE is the Unlock Code I sent you) 3. Device should say: “Network Lock Deactivated” 4. Phone may automatically reboot NOTE: If you are unable to connect to service provider or unable to make outgoing calls or receive messages, this has nothing to do with your phone being locked or not, you need to force the Blackjack to change to GSM mode, this can be done as follows: 1. Type *#1546792*# 2. Select Option 3 Network & Call Settings 3. Select option 5 Network Mode 4. Select GSM 5. This should resolve your problem. Model: AT&T / Cingular BlackJack 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Power on the device. Wait approximately 30 seconds until the Sim Lock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code) 3. Enter the unlock code in the blank field 4. Press Ok. If the Unlock Code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the Unlock Code after delays (see above in Device Specific Information). If the Unlock Code is correct, a success dialog will appear. 5. Press Ok 6. The device is now unlocked and should continue booting Or 1. Insert an Unauthorized Sim Card 2. Enter Unlock code when prompted NOTE: If you are unable to connect to service provider or unable to make outgoing calls or receive messages, this has nothing to do with your phone being locked or unlocked, you need to force the BlackJack to change to GSM mode, this can be done as follows: 1. Power on your Phone 2. Type *#1546792*# 3. Select Option 3 Network & Call Settings 4. Select option 5 Network Mode 5. Select GSM Or 1. Power on without Sim Card, you will see a message saying “SIM Failure” at the top of the screen. 2. Click “Done” then press the green button to get into the dial pad. Type in #7465625*638* 3. You will see “Enter Network Control Key” 4. Enter Unlock Code 5. Click OK 6. Your phone is now unlocked Model: Fido i616 Jack 1. Insert Fido Sim Card and power ON 2. Type #7465625*638* 3. Network Lock Screen appear, enter Unlock Code 4. Phone is now unlocked Model: i450 & i560 1. Turn ON your phone without Sim Card 2. Type #PW+Unlock Code+1# The letter P appear after you press star button (*) three times quickly The letter W appear after you press the star button (*) four times quickly The letter + appear after you press the star button (*) two times quickly Model: i780 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Enter the PIN code to Sim Card 3. At the top of screen an “exclamation mark” icon will appear 4. Click on “exclamation mark” icon 5. Settings Link will appear 6. Click on it 7. Virtual keyboard appears on screen with Enter PIN prompt 8. Enter Unlock Code Model: i900 / Omnia 1. Make sure Wireless Mode is ON 2. Insert an Unauthorized Sim Card and turn ON your phone 3. Enter the PIN code of this refused Sim Card 4. Now should ask for Unlock Code 5. Enter Unlock Code Model : J600
Unlock Code is enter as: #0149*MCK# or #0111*NCK# 1. Press the # button on the keypad 1 time to display # 2. Type the 4 digit code which corresponds to your lock type (in most cases the MCK code will work with code:1) 3. Press the star (*) button on the keypad 1 time 4. Enter Unlock Code which corresponds to your lock type 5. Press the # button on the keypad 1 time 6. Phone should now be unlocked 7. If phone is still locked, you have a 2nd lock activated so please check locks and enter 2nd code Model: SGH-P207 1. Reset to original factory setting by typing *2767*3855#, your phone will reboot 2. Insert an unauthorized Sim Card and turn ON your phone 3. A Wrong Sim message will appear 4. Enter * #9998*3323# 5. Exit white screen appear, tap the right soft key, (occasionally it will not go to the next screen, if so press the down key) 6. Menu appear, scroll down to the malloc Fail option, this will reboot, and normal service screen will appear 7. Enter *0141# and press the green Call key 8. Personalized screen appear, the name of the current Sim Card provider will appear on the screen 9. Turn phone OFF, and then turn back ON 10. Go to menu by tapping left soft key 11. Settings is in bottom right hand corner 12. Select option 7 = Security 13. Select option 6 = Sim Lock 14. Select option 1 = Disable 15. Enter 00000000 (eight zeros), the message will come up Sim lock disabled with a check mark; your phone is now unlocked to use with other carriers. Model: SGH-T609 1. Turn ON your phone without Sim Card 2. Type #011*CODE# (CODE is the Unlock Code I sent you) 3. Device should say: “Network Lock Deactivated” 4. Phone may automatically reboot Model: Zxxx Series, Dxxx Series, Pxxx Series, F490 (ex: Z140, D520, P200, etc…) 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Enter #7465625*638*CODE# (CODE is the Unlock Code I sent you) Model: Z320i, Z510, Z650i 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Type **CODE# (CODE is the Unlock Code I sent you) Or 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Type #0111*CODE# (CODE is the Unlock Code I sent you) Model: Most Non Android Samsung 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Phone will ask for “Password” 3. Enter Unlock Code Or 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Type #0111*CODE# (CODE is the Unlock Code I sent you) PHONE FREEZE: SIM Unavailable 1. Insert an Unauthorized Sim Card and turn ON your phone so phone displays “Phone Freeze, SIM unavailable. Please contact service provider” 2. Enter MCK (Defreeze Code) and press “OK”, “Confirm” or the center button (no digits will be seen on display when entering this code) 3. Now phone will ask you for Network Code, enter NCK (Unlock Code) and press OK. 4. If nothing happens when you enter NCK (Unlock Code), you will need to compose code like this: #7465625*638*CODE# (CODE is the Unlock Code I sent you) 5. Now your phone should be unlocked. Note. If phone does not accept NCK (Unlock Code), and still have no luck with #7465625*638*CODE# (CODE is the Unlock Code I sent you), please try step 4 using MCK (defreeze code)
To solve “Phone Freeze” or “Return for service problem” 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Enter “Defreeze” Code (it will not be visible) and click OK key. (If you purchased our Samsung Factory method, then the “Freeze Code” is also known as Defreeze Code) Or 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Screen will display “Phone is freeze / SOS” 3. Type the Defreeze Code (Nothing will show on screen) 4. Hit the “Enter Button” 5. Phone will ask for the Network Lock Code 6. Enter Unlock Code 7. Phone will be unfreeze and unlocked
DO NOT ORDER UNLESS YOU AGREE TO TERMS AND CONDITIONS!!!
Terms and Conditions: Once the order is placed for this service it is NON-REFUNDABLE. There are NO cancellations and absolutely NO REFUNDS for any reason. The estimated completion time is usual and customary but NOT guaranteed. There will be no refund if it takes longer than the estimated completion time. We will not accept any liability for failure of this service. If this service fails it is most likely because the phone is blacklisted or blocked because of non-payment on contract. If a phone has been blacklisted because it was reported lost or stolen, if it has been blocked by AT&T because of non-payment on contract, or if it has been replaced there will be no refund. We are not responsible to find out whether a phone is blocked or blacklisted. If you want to make sure it is not blocked or blacklisted contact AT&T. By placing an order you agree to these terms and conditions.
Intructions
by UnlockUSA
How To Unlock iPhone:
1. Send the IMEI to our server Unlockyes
2. Wait till we return the answer “activated”
3. Then, install last version of iTunes
4. Make sure phone is last version updated by official itunes sw
5. Connect phone to iTunes with not accepted (not valid) simcard
6. Wait until itunes detect phone
7. Now disconnect phone and reconnect after 10 seconds.
8. Phone Unlocked
NOTE: This is the only “lifetime” unlock solution for Apple iPhone as the IMEI is registered as “Unlocked” in Apple database. Your phone will always be unlocked even after each new update of your phone firmware !FaqsWhy my Apple iPhone is locked?When you purchase a cell phone it is often offered at a discounted price by the cellular network. In return for this generosity they “lock” your Apple iPhone to their network, so that you can only use their network for making and receiving calls. This means that you cannot use the SIM card of another network, and if you try to do so the phone will display “Phone Restricted”, “Contact Service Provider”, “Enter Unlock Code” or a similar message. Unlocking the phone removes this lock, allowing you to use your Apple iPhone on any GSM wireless network anywhere in the world.Why should I unlock my Apple iPhone?
• Save a fortune abroad, by using cheap local SIM cards rather than expensive roaming tariffs.
• As usually subsidize the cost of the phone, by unlocking it you are increasing the resale value of your Apple iPhone by up to 300%.
• Use your work and personal SIM card in your unlocked Apple iPhone no need to carry two phones again.
HOW TO UNLOCK BLACK BERY
By.unlockusa
WARNING: If after you enter “meood” or “mepd” from the unlock instructions below and your “Enter Network MEP” box show less than 4 try left (default is 10 try left). STOP, do not enter the unlock code. You MUST visit and click “How to Read Blackberry MEP Name” to get the MEP Name and contact us. If you enter the wrong code and get to 0 try left, your Blackberry will be permanent locked. Therefore, with MEP Name, you are 100% sure that the unlock code is correct.
Model: 6xxx 7xxx: Example; 6230, 7100, and 7290 etc.:
Before you start, you MUST take out the Sim Card & turn OFF ALL wireless radios
1. Press the Menu key.
2. Select Options / Settings.
3. Select Sim Card.
4. Enter MEPD (not case sensitive), Note: When typing in MEPD, the letters will not appear on the screen.
5. Then enter MEP Hold Alt Key and type number 2. NOTE: You must use the “alt” key to enable numbers, example: enter MEP hold “ALT key” and enter 2. Note: When typing in MEP2, the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box. If you do not see “Enter Network MEP” box, you didn’t type in MEP2 properly.
Model: 7100, 8100, 8110, 8120 & 8220, 9100:
Before you start, you MUST have a Sim Card & turn OFF ALL wireless radios
1. Press the Menu key.
2. Scroll to Turn Wireless Off and press the trackball (Will show Turn Wireless ON).
3. Scroll to Options and press the trackball.
4. Scroll to Advanced Options and press the trackball.
5. Scroll to SIM Card and press the trackball.
6. Type MEOOD (not case sensitive). This step opens up the personalization on the device.
7. Type MEOO, then hold ALT key and type number 2. Note: When typing in MEOO2 the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
8. Enter Unlock Code.
9. Press the Enter Key. (Make sure you press the Enter Key within 5 second or you have to enter the unlock code again).
Model: 8700, 8700c, 8700g, 8700r
Before you start, you MUST have a Sim Card & turn OFF ALL wireless radios
1. Press the Menu key.
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Setting icon.
5. Scroll to Options.
6. Scroll to and select Advanced Options.
7. Scroll to and select SIM Card.
8. Type MEPD Note: When typing in MEPD the letters will not appear on the screen. This step opens up the personalization on the device.
9. Type MEP then hold “Alt” key and type number 2. Note: When typing in MEP and hold “Alt” key and 2; the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
10. Enter the unlock code.
11 . Press the Joydial to confirm (“Code Accepted should display)
12. Press and hold the red End key to turn the handheld off and then back on.
13. Once the device has powered on, follow steps 1 & 2 and restore connections.
Model: Most Model
Before you start, you MUST have a Sim Card (could be Active or Inactive) & turn OFF ALL wireless radios. After turn on the phone, if phone ask for Network MEP code, select NO.
1. Press the Menu key.
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options or Device>Advance System Setting (depend on model).
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen. This step opens up the personalization on the device.
8. Type MEP then hold “Alt” key and type number 2. Note: When typing in MEP and “Alt” and number 2; the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box. IF “Enter Network MEP” box does not open, then hold the “Alt” key and type mep2.
9. Enter the unlock code.
10. Press the trackball (“Code Accepted should display)
11. Press and hold the red End key to turn the handset off and then back on.
12. Once the device has powered on, follow steps 1 & 2 and restore connections.
Method 1: Model: 9500, 9530 Storm, 9550 Storm 2
Before you start, you MUST have an Unauthorized Sim Card inserted. Unauthorized Sim Card is a Sim Card that is NOT belongs to the provider of the phone. Example: If you have a Verizon phone, you need to insert a T-Mobile Sim Card inside the phone before turn it on.
1. Power on the phone.
2. Phone will said “MEP check failed. Do you want to enter MEP unlock code”. Select Yes.
3. “Enter Network MEP code (# left)”. Enter the unlock code.
4. Press Enter, you should see “Code Accepted”
5. You need to check Network Connection is set on GSM/UMTS. Menu>Manage Connection>Mobile Network Options and make sure it GSM/UMTS.
6. Once GSM/UMTS is selected. You can now ready to make phone call.
Notice: If the network not working after your phone is fully charged and unlocking process “Code Accepted”. You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network. Now it should work. (Verizon 8830 World Edition DOES NOT work in USA )
Method 2: Model: 8830, 9500, 9530 Storm, 9550 Storm 2
Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.
1. Press the Menu key
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.
8. Type MEP then hold “Alt” key and type number 2. Note: When typing in MEP “Alt” and number 2; the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the unlock code.
10. Press Enter (Press the trackball for 8830), you should see “Code Accepted”
11. Press and hold power key to turn the handset off and then back on.
12. Once the device has powered on, follow steps 1 & 2 and restore connections.
Notice: If the network not working after your phone is fully charged and unlocking process “Code Accepted”. You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network. Now it should work. (Verizon 8830 World Edition DOES NOT work in USA )
Model: For Telus & Bell Mobility, Some Fido model and all carrier that have Service Provider block (MEP4).
Sometime we send you two sets of Unlock Code, use the code as a set;
Example: MEP2:43237528-AND-MEP4:35848078 OR MEP4:4371476728858074.
Set 1: MEP2:43237528-AND-MEP4:35848078.
Set 2: MEP4:4371476728858074.
DO NOT mix these two sets. Determine which option look similar to your phone and then follows the correct instructions.
1. If your Blackberry has only Network “Active”, then choose Option 1. You ONLY need the MEP2 code we send you.
2. If your Blackberry has both Network and Service Provider “Active”, then choose Option 2. You need both the MEP2 and MEP4 code we send you.
3. If your Blackberry has only Service Provider “Active”, then choose Option 3. You ONLY need the MEP4 code we send you.
Option 1: Option 2 Option 3 ID: 8901260700015407027 ID: 8901260700015407027 ID: 8901260700015407027 Personalization: Personalization: Personalization: SIM: Disabled SIM: Disabled SIM: Disabled Network: Active (MEP2) Network: Active (MEP2) Network: Active (MEP2) Network Subset: Disabled Network Subset: Disabled Network Subset: Disabled Service Provider: Disabled (MEP4) Service Provider: Active (MEP4) Service Provider: Active (MEP4) Corporate: Disabled Corporate: Disabled Corporate: Disabled Option 1: Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.
1. Press the Menu key.
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.
8. Type MEP then hold “Alt” key and type number 2. Note: When typing in MEP and “Alt” and number 2; the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the MEP2 code we send you.
10. Press Enter (Press the trackball for 8830), you should see “Code Accepted”
11. Press and hold power key to turn the handset off and then back on.
12. Once the device has powered on, follow steps 1 & 2 and restore connections.
Option 2: Before you start, you MUST have a Sim Card inside the phone (could be Active or Inactive) & turn OFF ALL wireless radios.
1. Press the Menu key.
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen.
8. Type MEP then hold “Alt” key and type number 2. Note: When typing in MEP Alt 2 the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the MEP2 code we send you.
10. Press the trackball (“Code Accepted” should display).
11. Type MEP then hold “Alt” key and type number 4.
12. Enter the MEP4 code we send you.
13. Press the trackball (“Code Accepted” should display again).
14. Press and hold the red End key to turn the handset off and then back on.
15. Once the device has powered on, follow steps 1 & 2 and restore connections.
Option 3: Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.
1. Press the Menu key.
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.
8. Type MEP then hold “Alt” key and type number 4. Note: When typing in MEP and “Alt” and number 4; the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the MEP4 code we send you.
10. Press Enter (Press the trackball for 8830), you should see “Code Accepted”
11. Press and hold power key to turn the handset off and then back on.
12. Once the device has powered on, follow steps 1 & 2 and restore connections.
Here are the SPC/MSL CDMA Unlock Codes
MSL/SPC Code: To use this code:
1. From the home screen of the Blackberry, press the green call button to enter the phone.
2. Type in ##MSL/SPC CODE then the green talk button (ie: ##123456 Green talk button).
3. In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number.
4. Press the menu key and choose save.
5. The device will re-boot.
When the device re-boots, Activation Required will be gone and the active carrier name will now appear.
Known issue for Verizon 8830 World Edition & 9530 Storm, 9550 Storm 2, Tour 9630:
1. If your Storm is not recognizing the network, make sure your phone battery is full and the radio is on.
2. Sometimes the phone requires you to do “MEPPD” and “MEPP2” instead of “MEPD” and “MEP2″. If this occurs, redo unlock step above with “MEPPD” and “MEPP2”
3. If the network not working after your phone is fully charged and unlocking process “Code Accepted”. You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network. Now it should work. (Verizon 8830 World Edition DOES NOT work in USA )
Removing “Activation Required” on the screen for Verizon Storm:
1. On the main screen, press ##000000
2. For the Mobile Directory Number, Enter your phone number in here.
Press the Menu to save the options and the phone will automatically restart.
HOW TO UNLOCK SAMSUNG OR ANDROID
IMPORTANT NOTICE: Make sure to turn off Wi-Fi under wireless connections to OFF for all Android Device before proceeding to entering the Unlock code. Our Samsung code process is 99.9% accurate if you provide the correct information. Therefore, a Video proof will be required if code error occur for verification. It is also good idea to film your unlocking process so I may help to troubleshoot the problem. If you get “Network Unlock Unsuccessful” message. This is a known issue so not to worry. At the end of this instruction, there is a troubleshoot guide to help you resolve this issue. Model: Most New Samsung Model 1. Insert Unauthorized Sim Card into device 2. Power on the device 3. Enter Unlock Code when prompted 4. Device should be unlock if “Code Accepted” If the phone show “Phone Freeze” message. This mean someone already tried to enter the wrong code into this phone too many time. You will require to order a defreeze code. If after you enter the Unauthorized Sim Card and phone is not prompt to enter the Unlock Code and your Samsung is android, Go to the dial screen and press #7465625*638*# Once prompted for code, enter 8 digit Unlock Code. Or If you see “No Valid Sim Card” after you insert an Unauthorized Sim Card, remove the Unauthorized Sim Card and use the Authorized Sim Card or with NO Sim Card and follow this instruction. 1. Type #7465625*638*CODE# (CODE is the Unlock Code I sent you) 2. Phone deactivated message means its unlocked Or 1. Switch ON the phone without a Sim Card (if this does not work try with a Unauthorized Sim Card first and if necessary try an Authorized Sim Card ) 2. Type: #0111*CODE# (CODE is the Unlock Code I sent you) Solution for “Network Unlock Unsuccessful” or “Code Error” First check the IMEI you provide by type *#06# on the phone. If you provide the correct IMEI, then continue. Troubleshoot Guide Solution #1 1. Turn the phone Wi-Fi OFF and then turn device ON without SIM card. 2. Type *7465625*638*# 3. You will see the NETWORK LOCK screen 4. In MCC/MNC field, enter MCC/MNC code for the provider you want to use. (example: enter 310260 if you want to use this phone for T-mobile USA Sim Card; 310410 or 310380 for AT&T). Check this link for complete MCCMNC for your provider: (It is very important to try all the MCC/MNC code if your New Sim Card Network has more than one code) 5. In CONTROL KEY field, enter the Unlock Code 6. Press OK 7. You should get a message: LOCK SUCCESSFUL 8. Turn off your phone, insert your New Network Sim Card and power ON. The phone should be unlocked. If this solutions does not work for your phone; Go to Solution #2 Troubleshoot Guide Solution #2 (You will require a Defreeze (Unfreeze Code), or MCK code for this solution) Follow these step carefully, as long as you have the correct code it will work 100% 1. Insert an Unauthorized Sim Card and power ON your phone. You will see “SIM Network Unlock PIN” or “Enter Network Lock Control Key” on the screen. 2. Type your Defreeze Code (MCK Code) and hit Unlock button. You will get a “Unsuccessful” message but don’t worry, this is normal. 3. Now type the Unlock code (Network or NCK Code) and hit Unlock button. If the phone say “Network Lock Successful” it worked and your phone unlocked. But if not, go on to step 4. 4. If you get “Unsuccessful”, hit Dismiss button and type *2767*3855# on phone keypad. (CAUTION! This will reformat all your data!, you will lost all data on the phone.) 5. After phone restarts, enter the Defreeze Code (MCK Code) when prompted at “SIM Network Unlock PIN” or “Enter Network Lock Control Key” screen and hit Unlock button. You will get a “Unsuccessful” message but don’t worry, this is normal. 6. Enter the Unlock Code (Network or NCK code) and hit Unlock button. 7. Your phone should now say “Network Lock Successful” 8. Now your phone is successfully unlocked! Model: SGH-A127, SGH-E840, SGH-F210, SGH-J600, SGH-T749 1. Turn ON your phone without Sim Card 2. Type #0111*CODE# (CODE is the Unlock Code I sent you) 3. Device should say “Network Lock Deactivated” 4. The phone may reboot and the unlock is completed Model: A107, A137, A167, A177, A227, A237, A437, A517, A707, A767 Propel, A837 Rugby, A798 Mythic, A867 Eternity, A887 Solstice, C417, E250, E370, E590, F400, F480, F490, G600, i907 Epix, J700, L760, S366, T309, T319, ST349, T409, T429, T439, T459 Gravity, T469, T509, T609, T639, T659, T669, T919 Behold, T929, U900, X497, Z105, Z107, Z560. 1. Turn ON your phone without Sim Card 2. Type #7465625*638*CODE# (CODE is the Unlock Code I sent you) 3. Device should say “Network Lock Deactivated” 4. The phone may reboot and the unlock is completed Or 1. Turn ON your phone Authorized Sim Card 2. Type #7465625*638*CODE# (CODE is the Unlock Code I sent you) 3. Device should say “Network Lock Deactivated” 4. The phone may reboot and the unlock is completed Model: SGH-A877 1. Insert an Authorized Sim Card and turn ON your phone 2. Device must be in Portrait mode. Hit the Dial button on the touch screen. 3. Type #7465625*638*CODE# (CODE is the Unlock Code I sent you) 4. Device should say: “Network Lock Deactivated” 5. Phone may automatically reboot Model: A737, A777, Blackjack SGH-i607, SGH-i616, SGH-i617, SGH-i627, SGH-i637, SGH-A877 1. Insert an Authorized Sim Card and turn ON your phone 2. Type #7465625*638*CODE# (CODE is the Unlock Code I sent you) 3. Device should say: “Network Lock Deactivated” 4. Phone may automatically reboot NOTE: If you are unable to connect to service provider or unable to make outgoing calls or receive messages, this has nothing to do with your phone being locked or not, you need to force the Blackjack to change to GSM mode, this can be done as follows: 1. Type *#1546792*# 2. Select Option 3 Network & Call Settings 3. Select option 5 Network Mode 4. Select GSM 5. This should resolve your problem. Model: AT&T / Cingular BlackJack 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Power on the device. Wait approximately 30 seconds until the Sim Lock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code) 3. Enter the unlock code in the blank field 4. Press Ok. If the Unlock Code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the Unlock Code after delays (see above in Device Specific Information). If the Unlock Code is correct, a success dialog will appear. 5. Press Ok 6. The device is now unlocked and should continue booting Or 1. Insert an Unauthorized Sim Card 2. Enter Unlock code when prompted NOTE: If you are unable to connect to service provider or unable to make outgoing calls or receive messages, this has nothing to do with your phone being locked or unlocked, you need to force the BlackJack to change to GSM mode, this can be done as follows: 1. Power on your Phone 2. Type *#1546792*# 3. Select Option 3 Network & Call Settings 4. Select option 5 Network Mode 5. Select GSM Or 1. Power on without Sim Card, you will see a message saying “SIM Failure” at the top of the screen. 2. Click “Done” then press the green button to get into the dial pad. Type in #7465625*638* 3. You will see “Enter Network Control Key” 4. Enter Unlock Code 5. Click OK 6. Your phone is now unlocked Model: Fido i616 Jack 1. Insert Fido Sim Card and power ON 2. Type #7465625*638* 3. Network Lock Screen appear, enter Unlock Code 4. Phone is now unlocked Model: i450 & i560 1. Turn ON your phone without Sim Card 2. Type #PW+Unlock Code+1# The letter P appear after you press star button (*) three times quickly The letter W appear after you press the star button (*) four times quickly The letter + appear after you press the star button (*) two times quickly Model: i780 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Enter the PIN code to Sim Card 3. At the top of screen an “exclamation mark” icon will appear 4. Click on “exclamation mark” icon 5. Settings Link will appear 6. Click on it 7. Virtual keyboard appears on screen with Enter PIN prompt 8. Enter Unlock Code Model: i900 / Omnia 1. Make sure Wireless Mode is ON 2. Insert an Unauthorized Sim Card and turn ON your phone 3. Enter the PIN code of this refused Sim Card 4. Now should ask for Unlock Code 5. Enter Unlock Code Model : J600
Unlock Code is enter as: #0149*MCK# or #0111*NCK# 1. Press the # button on the keypad 1 time to display # 2. Type the 4 digit code which corresponds to your lock type (in most cases the MCK code will work with code:1) 3. Press the star (*) button on the keypad 1 time 4. Enter Unlock Code which corresponds to your lock type 5. Press the # button on the keypad 1 time 6. Phone should now be unlocked 7. If phone is still locked, you have a 2nd lock activated so please check locks and enter 2nd code Model: SGH-P207 1. Reset to original factory setting by typing *2767*3855#, your phone will reboot 2. Insert an unauthorized Sim Card and turn ON your phone 3. A Wrong Sim message will appear 4. Enter * #9998*3323# 5. Exit white screen appear, tap the right soft key, (occasionally it will not go to the next screen, if so press the down key) 6. Menu appear, scroll down to the malloc Fail option, this will reboot, and normal service screen will appear 7. Enter *0141# and press the green Call key 8. Personalized screen appear, the name of the current Sim Card provider will appear on the screen 9. Turn phone OFF, and then turn back ON 10. Go to menu by tapping left soft key 11. Settings is in bottom right hand corner 12. Select option 7 = Security 13. Select option 6 = Sim Lock 14. Select option 1 = Disable 15. Enter 00000000 (eight zeros), the message will come up Sim lock disabled with a check mark; your phone is now unlocked to use with other carriers. Model: SGH-T609 1. Turn ON your phone without Sim Card 2. Type #011*CODE# (CODE is the Unlock Code I sent you) 3. Device should say: “Network Lock Deactivated” 4. Phone may automatically reboot Model: Zxxx Series, Dxxx Series, Pxxx Series, F490 (ex: Z140, D520, P200, etc…) 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Enter #7465625*638*CODE# (CODE is the Unlock Code I sent you) Model: Z320i, Z510, Z650i 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Type **CODE# (CODE is the Unlock Code I sent you) Or 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Type #0111*CODE# (CODE is the Unlock Code I sent you) Model: Most Non Android Samsung 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Phone will ask for “Password” 3. Enter Unlock Code Or 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Type #0111*CODE# (CODE is the Unlock Code I sent you) PHONE FREEZE: SIM Unavailable 1. Insert an Unauthorized Sim Card and turn ON your phone so phone displays “Phone Freeze, SIM unavailable. Please contact service provider” 2. Enter MCK (Defreeze Code) and press “OK”, “Confirm” or the center button (no digits will be seen on display when entering this code) 3. Now phone will ask you for Network Code, enter NCK (Unlock Code) and press OK. 4. If nothing happens when you enter NCK (Unlock Code), you will need to compose code like this: #7465625*638*CODE# (CODE is the Unlock Code I sent you) 5. Now your phone should be unlocked. Note. If phone does not accept NCK (Unlock Code), and still have no luck with #7465625*638*CODE# (CODE is the Unlock Code I sent you), please try step 4 using MCK (defreeze code)
To solve “Phone Freeze” or “Return for service problem” 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Enter “Defreeze” Code (it will not be visible) and click OK key. (If you purchased our Samsung Factory method, then the “Freeze Code” is also known as Defreeze Code) Or 1. Insert an Unauthorized Sim Card and turn ON your phone 2. Screen will display “Phone is freeze / SOS” 3. Type the Defreeze Code (Nothing will show on screen) 4. Hit the “Enter Button” 5. Phone will ask for the Network Lock Code 6. Enter Unlock Code 7. Phone will be unfreeze and unlocked
